Description:
Condensation Control with two sensors for water detection and an adjustable delay before break to prevent nuisance trips
Specifications:
Input: 18 to 30 VAC
Output:
Output:
- 24 VAC to thermostat/cooling control
- 24 VAC to optional overflow
LED Output Rating: 2 amps
Delay Before Trip: 1-3 minutes
Operating Frequency: 50 to 60 Hz
Maximum Operating/Storage Relative Humidity: 95% non-condensing
Storage Temperature: -40°C to 85°C
Weight/Dimensions:
- Weight: 0.2
- Height: 1.25
- Width: 3
- Length: 2
ICM340
- The ICM340 Condensation Control is used to prevent the overflowing of an evaporator condensation pan. Overflow problems can occur from a slow or blocked condensate drain or condensate pump failure. Epoxy encapsulated circuit provides maximum strength against moisture and allows use in extreme environmental conditions. Recommended for package units, vertical coils, stud mounts, split systems, slant coils and water heaters.
- Two sensors for water detection
- Adjustable delay before break time to prevent nuisance trips
- Optional overflow LED kit
- Quick-Connect connection terminals (1/4 inch) to provide easy hookup
Click on the link(s) below to open the desired PDF file. All files and the information contained within are subject to change. Please report any broken links to info@icmcontrols.com.
Click the stars to rate the product
Water Guard: 401475
