ICM284

    00000


Description:


Furnace Control Control - replacement for York 03101280000 control boards

Specifications:

    Line Voltage Range: 208 VAC @ 60Hz
    Ignitor: 5A resistive @ 208 VAC
    Cool Blower: 30A, 2HP, 240 VAC
    Heat Blower: 10A, 1/2HP, 250 VAC
    Inducer Motor: 4A, 208 VAC
    Gas Valve: 4A @ 24 VAC
    Compressor: 5A resistive @ 24 VAC

Weight/Dimensions:

  • Weight: 0.45
  • Height: 1.5
  • Width: 8
  • Length: 5.5
ICM284

    The ICM284 control is microprocessor based using software to determine the sequence of operation, timing, trial for ignition, flame sensing and lockout. The control monitors the status of the room thermostat, limit and rollout switches, air pressure switch and flame sensor before enrgizing the vent motor, blower control, hot surface ignitor and gas valve. The control provides diagnostic codes (flashing LEDs) to aid in testing and troubleshooting.
  • Low cost form, fit and functional replacement board for York 03101280000
  • Controls vent motor, blower control, hot surface ignitor and gas valve
  • Designed for 100% gas shutoff in case of ignition failure
  • Monitors timing, trial for ignition, flame sensing and lockout
  • Diagnostic LEDs aid in testing / troubleshooting

Click on the link(s) below to open the desired PDF file. All files and the information contained within are subject to change. Please report any broken links to info@icmcontrols.com.

Click the stars to rate the product
This Is a CAPTCHA Image
Enter the text of the image above
York: 03101280000