New Search

If you are not happy with the results below please do another search

More results...

Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

177 search results for:

11

ICM2916

Trane Replacement Control Direct Spark Ignition (DSI) Control Board The ICM2916 is a form, fit, and functional replacement for Trane Spark Ignition Control: D674712P02 shown in the cross-reference section of the guide. The control boards are designed as automated gas ignition controls that monitor the ignition sequence including the inducer, pressure switch, spark ignition, gas […]

12

ICM2915

Trane Replacement Control Direct Spark Ignition (DSI) Control Board The ICM2915 is a form, fit, and functional replacement for Trane Spark Ignition Control: D674713P01 shown in the cross-reference section of the guide. The control boards are designed as automated gas ignition controls that monitor the ignition sequence including the inducer, pressure switch, spark ignition, gas […]

13

ICM2914

Trane Replacement Control Direct Spark Ignition (DSI) Control Board The ICM2914 is a form, fit, and functional replacement for Trane Spark Ignition Control: D674712P01 shown in the cross-reference section of the guide. The control boards are designed as automated gas ignition controls that monitor the ignition sequence including the inducer, pressure switch, spark ignition, gas […]

14

ICM2913

Trane Replacement Control Direct Spark Ignition (DSI) Control Board The ICM2913 is a form, fit, and functional replacement for the Trane Spark Ignition Control: D674711P01 shown in the cross-reference section of the guide. The control boards are designed as automated gas ignition controls that monitor the ignition sequence including the inducer, pressure switch, spark ignition, […]

15

ICM401A

3-Phase Monitor Protect your most valuable investments! The ICM401A offers affordable protection against phase loss/reversal and unbalance. Upon application of power with the safety switches closed, the load will energize. If any of the safety switches open for longer than 600 ms, the fault light will come on and the load will stay de-energized regardless […]

16

ICM6700

Gas Ignition Control 12 VDC Direct Spark Ignition Control Suburban Replacement. This ignition control circuit board works on all Suburban 12V furnaces and Suburban water heater model 520820. When the thermostat calls for heat, the ICM6700 will verify the sail switch is open before energizing the inducer blower. Once the inducer blower is energized, the […]

17

ICM6701

Water Heater Direct Spark Ignition Control   With a heat call from the thermostat; the ICM6701 will begin a 15 second on delay, after the delay the gas valve and spark ignitor are energized and the control will check for the presence of flame. Once flame is detected the spark ignitor is turned off while […]

18

ICM292A

Rheem OEM Replacement Control Direct Spark Ignition (DSI) Control Board The ICM292A is a low-cost DSI gas ignition control that replaces the following Rheem model: 62-24140-04. The ICM292A has incorporated LED diagnostics to assist in troubleshooting. Fault code information can be found in the application guide. Please refer application guide with the furnace installation manual […]

19

ICM2911

Modine OEM Replacement Control Direct Spark Ignition (DSI) Control Board The ICM2911 control is low cost form, fit and functional replacement board for Modine 5H79749 control board. It monitors system timing, trial for ignition, system switches, flame sensing and lockout. Fault code information can be found in the application guide. Please refer to the application […]

20

ICM2909

Rheem OEM Replacement Control Direct Spark Ignition (DSI) Control Board The ICM2909 DSI control replaces the following Rheem models: 62-23599(-01,-02,-03,-04,-05). The ICM2909 has incorporated LED diagnostics to assist in troubleshooting. Fault code information can be found in the application guide.