New Search

If you are not happy with the results below please do another search

More results...

Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

177 search results for:

1

ICM386

Head Pressure Control Accessory for ICM325A Temperature Probes Temperature probe for use with ICM325A head pressure control with optional heat pump bypass.

2

ICM870-32A

32A Soft Starter The ICM870 Soft Start is intended for residential, commercial, RV & marine applications. The ICM870 integrates compressor or motor in-rush current over startup time, thus reducing peak current demand on a power supply source by up to 70%. Effectively reducing power draw to the A/C, the ICM870 utilizes a built-in self learning […]

3

ICM-UFPT-5

Uses near field communication in conjunction with a smart phone App to allow the user to select from six different timer modes • On delay • Off delay • Interval • Anti-Short Cycle • Repeat Cycle • Single shot   Click here for UFPT-2   What is NFC Technology? The ICM-UFPT-5 allows the user to […]

4

ICM-UFPT-2

Uses near field communication in conjunction with a smart phone App to allow the user to select from four different timer modes • On delay • Interval • Anti-Short Cycle • Repeat Cycle   Click here for UFPT-5   What is NFC Technology? The ICM-UFPT-2 allows the user to establish and adjust desired time delay […]

5

ICM517A

Coming Spring 2024! The ICM517A is a NEMA Type 4X enclosed Type 2 Surge Protective Device (SPD) designed to protect valuable single-phase equipment by dissipating momentary voltage spikes and transient power surges. Applications include the protection of motors, electronics, air conditioning systems, appliances, refrigeration, and more. The tried and true, preexisting industry favorite ICM517 SPD […]

6

ECA500-11 Series

Total Motor Protection Relay Protect your most valuable investments! The ECA500-11 is a series of micro-controlled 3-phase total motor protection current, voltage & power monitoring relays. They’re designed to protect electrical loads and motors from failure and damage due to common current and voltage faults. The ECA500-11’s constantly supervise current and voltage values and when […]

7

ECA100-11 Series

Motor Protection Relays Protect your most valuable investments! ECA100-11 is a series of micro-controlled 3-phase motor protection current, voltage monitoring relays. Designed to protect electrical motors from failure and damage due to common current and voltage faults. The ECA100-11’s constantly supervise current and line voltage values and when any harmful condition occurs, the output is […]

8

ICM495

Disconnect with Internal Surge Protection The ICM495 is a UL Listed Electrical Disconnect with an Internal Surge Protective Device built-in. The ICM495 is available in two models 30A Fused and 60A Non Fused. The included Surge Protective Device is intended for 120VAC Single-Phase or 240VAC Split-Phase configurations. Designed to protect equipment from transient surges. The […]

9

ICM325A

Air conditioning and refrigeration systems are commonly necessary to operate during cold temperatures. Server rooms, grocery stores and event spaces to name a few. When exposed to low ambient conditions, ACs and Heat Pumps condensing head pressure drops. If the head pressure gets too low, the system will not have enough pressure to operate properly […]

10

ICM2920

Goodman OEM Replacement Control Integrated Furnace Control Boards The ICM2920 is a form, fit, and functional replacement for the furnace control boards shown in the cross-reference section of this guide. The ICM2920 is an automated gas ignition control board that monitors the ignition sequence including the inducer, pressure switch, spark ignition, gas valve, flame sense, […]