Learn more about ICM’s Legacy Electronic Controls. ISO Certified Electronic Manufacturer of Electronic controls for both OEM and the Aftermarket.
- Sort by Popularity
-
ICM279
ICM279
Form, fit, and functional replacement for Carrier HK61EA006 and HK61EA002 boards Heavy duty output relay for inductive loads Purges ducts of residual... -
ICM6700
ICM6700
Direct Spark Ignition (DSI) control board Monitors timing, Trial for ignition, flame sensing and lockout Designed for 100% gas shutoff in the case of... -
ICM6701
ICM6701
Water Heater Direct Spark Ignition Control Direct Spark Ignition (DSI) control board Monitors timing, Trial for ignition, flame sensing and lockout... -
ICM3000
ICM3000
Heat active (B) reversing valve logic Sensor input for defrost terminate Time and temperature terminate 14-minute fixed defrost time On-board... -
ICM533
ICM533
3-Phase Surge Protective Device, (Delta) High-Leg 120/240 VAC Delta High-Leg Configuration NEMA Type 4X watertight plastic enclosure for outdoor a... -
ICM532
ICM532
3-Phase Surge Protective Device, 600VAC (Delta) or 347/600VAC (Wye) Delta or Wye Configuration NEMA Type 4X watertight plastic enclosure for outdo... -
ICM2910
ICM2910
Fenwal OEM Replacement DSI Control Direct Spark Ignition (DSI) control modules Microprocessor-based Controls spark ignitor and gas valve Monitors tim... -
ICM716
ICM716
Allows an X13 or SelecTec constant torque ECM control to control a Single phase PSC motor Eliminates costly ECM repairs 3 High power relay outputs fo... -
ICM715
ICM715
Provides a single technician selected motor speed when replacing an OEM constant torque electronically commutated motor Simple installation Works on ... -
ICM306
ICM306
Reliable duty-cycle timer ideally suited for defrost applications Suitable for process equipment or applications requiring intermittent delays Switch... -
ICM860
ICM860
Increases starting torque up to 500% Ensures precise starts Not affected by ambient temperature Recycles instantly (less than one second) For scroll ... -
ICM712
ICM712
The ICM712 is a motor speed controlling interface for use with a low voltage thermostat or automated control unit to control the ECM’s output. ... -
ICM6500
ICM6500
Operates with electric or hot water heating systems. For electric systems, the blower fan is turned on with the electric heat. For hot water heating... -
ICM6202
ICM6202
Ability to operate line voltage 3-speed fan motor with low voltage controls Compatible with 4 pipe and 2 pipe systems with auto-changeover 20 VA 24V... -
ICM6200
ICM6200
Ability to operate line voltage, 3-speed fan motor with low voltage controls Compatible with 4-pipe, 2-pipe, heat pump, auto changeover 20 VA 24 VAC ...
