New Search

If you are not happy with the results below please do another search

More results...

Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

177 search results for:

51

ICM856

/in ,

PTCR Hard Starts Low-cost motor starting device ICM’s PTCR controls are low-cost competitive products to other PTCR style hard starts (for 1/2 – 10 HP applications)

52

ICM855

/in ,

PTCR Hard Starts Low-cost motor starting device ICM offers superior patented technology that is safer on your motor windings. It auto-senses the back EMF and cuts out of the circuit at the precise time when starting a motor; eliminates all-in capacitor dump used by PTCR devices (For up to 1.5 HP Applications)

53

ICM713

/in , ,

Motor Speed Controls ECM Controller Manual or automated control over an ECM for improved “air balance”. By Pulsing (PWM) the time, the motor is on and off and varying the speed of the motor greatly allows for control of the motor, which increases the motors efficiency & reduces wear and tear on the motor. It […]

55

ICM711

/in ,

Motor Speed Controls GE 2.3 ECM Controller The ICM711 is used to control the speed of a GE 2.3 ECM by automated control systems or manually via potentiometer.

56

ICM709

/in ,

Motor Speed Controls GE 2.3 ECM Controller The ICM709 is a motor speed controlling interface for use with a low voltage thermostat to control the ECM’s output.

57

ICM708

/in ,

Motor Speed Controls GE 2.3 ECM Controller Manual or automated control over an ECM for improved “air balance”. By Pulsing (PWM) the time, the motor is on and off and varying the speed of the motor greatly allows for control of the motor, which increases the motors efficiency & reduces wear and tear on the […]

59

ICM6202

/in ,

Fan Coil Relay Controls Three-Speed Fan Coil Control The ICM6202 allows 3-speed fan with voltage of either 115 VAC or 230 VAC to be controlled by a low voltage (24 VAC) signal or thermostat and provides low voltage control of heating/cooling valve. To use 115 VAC 3-speed fan, cut jumper JW1. To use 230 VAC […]