New Search

If you are not happy with the results below please do another search

More results...

Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

182 search results for:

1

ICM-UDEFROST

With the high cost and limited access to OEM replacement boards, the need for a singular Universal defrost control board which replaces the function of nearly all time & temperature heat pump defrost controls is a must. ICM controls has what you need with the ICM-UDefrost board. The added benefit of selecting the ICM-UDefrost is […]

2

ICM870-9A/16A

9A & 16A Soft Starts The ICM870 series soft starts ARE compatible with 2-stage HVAC units. If your 2-stage unit has two compressors, you will need two ICM870 units. The ICM870 Soft Start is intended for residential, commercial, RV & marine applications. The ICM870 integrates compressor or motor in-rush current over startup time, thus reducing […]

3

ICM870-32A

32A Soft Starter The ICM870 series soft starts ARE compatible with 2-stage HVAC units. If your 2-stage unit has two compressors, you will need two ICM870 units. The ICM870 Soft Start is intended for residential, commercial, RV & marine applications. The ICM870 integrates compressor or motor in-rush current over startup time, thus reducing peak current demand […]

6

ICM2807

Carrier OEM Replacement Control Low-Cost Form, Fit And Functional Replacement Board The ICM2807 is a low cost replacement for the Carrier HK42FZ017 furnace control board which is used to control gas valve, ignitor, blower motor, inducer, humidifier and air cleaner

7

ICM517A-Lite

The ICM517A-Lite is a compact Type 2 Surge Protective Device (SPD) designed to protect valuable single-phase equipment by dissipating momentary voltage spikes and transient power surges. Providing commercial property owners with peace of mind, contractors with a reliable selling proposition and wholesalers with a high demand product. Applications include the protection of motors, electronics, air […]

8

ICM279

Upon application of power to the G terminal, the ICM279 recognizes a call for the blower and a 1 second delay on make period begins. After the 1 second ON delay, the control energizes the blower motor. Upon removal of power from the G terminal, the board will keep the blower on for an additional […]

9

Sentry 3N1

The Sentry 3N1 combines the benefits of a ICM517A single phase surge protective device, and an ICM492 single phase voltage monitor while incorporating a disconnect breaker into one easy to install solution. It provides techs and homeowners a convenient way to break the power, protect against power surges and over/under voltage issues that can cause […]

10

ICM495

Disconnect with Internal Surge Protection The ICM495 is a UL Listed Electrical Disconnect with an Internal Surge Protective Device built-in. The ICM495 is available in two models 30A Fused and 60A Non Fused. The included Surge Protective Device is intended for 120VAC Single-Phase or 240VAC Split-Phase configurations. Designed to protect equipment from transient surges. The […]