ICM492

ICM (Obsolete/Legacy Products)

ICM492

Specifications Literature Replaces

Single-Phase Voltage Monitor

The ICM492 constantly monitors line voltage and protects single-phase equipment against low and high voltage conditions, and rapid short cycling due to voltage fault or power interruption. Its easy-view, backlit digital display makes it user friendly to read and monitor voltage conditions, and adjust parameters to meet specific needs. Alternative Replacement: ICM492D

Specifications Literature Replaces

User Adjustable Settings

Voltage setpoint: 95-280 VAC
Anti-short cycle time delay: 0-720 seconds
Over voltage setting: 5-25%
Under voltage setting: 5-25%
Control mode: On and Off
Response time: 0.1 to 10 seconds

Inputs

Voltage: 80 to 300 VAC
Frequency: 50/60 Hz
Accuracy: ±2%
Low Power Consumption: max 50 mA @ 120V, max 100 mA @ 240V
Control Voltage: 18 to 240 VAC

Output

Type: Dry relay contacts
Form: SPDT

Relay Contact Ratings:

N.C. Contacts: 10A resistive @ 277 VAC
N.O. Contacts: 10A resistive @ 277 VAC

Connection Terminals:

0.25” male fast-on

Environmental:

Operating temperature range: -30°C to +70°C
Storage temperature range: -40°C to +85°C
Maximum Operating/Storage Relative Humidity: 95% non-condensing

Weight/Dimensions

Weight: 0.4 lb.
Height: 1.35″
Width: 3.2″
Length: 3″

Sell Sheet

Download

Application/Install Guide

Download

Wagner / DiversiTech: DSP-1

Recommended Alternative: ICM492D

ICM492D

Single Phase Voltage Monitors

Line Voltage Monitoring