ICM409

ICM (Obsolete/Legacy Products)

ICM409

Specifications Literature Replaces

Three-Phase Line Voltage Monitor

Designed in a small, easy-to-mount, surface mount or DIN rail style case, the ICM409 continuously monitors the incoming line voltage for errors. When the line voltage is appropriate, the ICM409 closes a set of N.O. contacts and lights a green LED. When the incoming voltage is outside of the user's set parameters, the N.O. contacts open and the red light will flash a code for the particular fault present. The control will also interrogate the line voltage during the fault condition to avoid short cycling and nuisance trips.

Specifications Literature Replaces

Electrical

User selectable universal voltage: 190-480 VAC
User selectable unbalanced voltage: 2-8%, trips after 6 seconds of unbalance condition
User selectable delay-on-make (staggered start) timer: .1 to 5 mins.
User selectable anti-short cycle/delay-on-break timer: .1 to 5 mins.
High/low voltage cut-out:
- High voltage cut-out set point + 12%
- Low voltage cut-out set point – 12%, detects condition within 100mS
Power/phase loss detection: Within 100mS
Phase reversal detection: Detects phase reversal condition on power up
Relay Contact Ratings: N.C. contacts: 10A resistive @ 250 VAC
- N.O. contacts: 10A resistive @ 250 VAC
Operating frequency: 50/60 Hz